Difficulty
Easy
Steps
7
Time Required
00:15:00 - 00:30:00
Private
This guide will not appear in search results and can only be viewed by team members!
Tools
Parts
No parts specified.
-
-
This is a custom expansion kit that requires the Brickstuff lighting kit for the LEGO Bugatti, which has been discontinued. If you purchased the Bugatti light kit from us in the past, you can contact us through our website to request this custom add-on. The price is $23.99 plus shipping.
-
If you are installing these lights at the same time as your main light kit for the Bugatti, complete the main light installation first.
-
The photo for this step shows the parts included with your expansion kit:New line.
-
One BRANCH15 1:4 adapter.
-
Two self-adhesive light strips with 20 blue LED lights each. These strips have wires with Pico LED connectors on the ends.
-
-
-
Carefully turn your Bugatti upside down and place it on a soft, flat surface. Take extra care with the side mirrors on both doors.
-
-
-
As shown in the first photo for this step, carefully peel the self-adhesive backing from the first light strip and attach it along one side of your Bugatti frame.
-
Make sure to mount the strip with the connecting wire and plug toward the REAR of the car.
-
Make sure the strip is straight, and press firmly to attach to the underside of the frame.
-
Make sure the strip does not touch any moving parts such as the wheel axles.
-
-
-
Repeat the process from the previous step to attach the second strip on the other side of the Bugatti frame.
-
Make sure the strips do not touch any moving parts like axles or gears.
-
-
-
As shown by the red arrows in the first and second photos for this step, carefully feed the wires for both light strips through the hole in the center of the yellow Technic bracket on each side of the underframe.
-
Feed the wires down into the main body of the Bugatti. You will connect them later.
-
-
-
Carefully turn your Bugatti so it sits upright once again.
-
As shown in the three photos for this step, begin disassembling the panels holding the rear center window in place.
-
These are the same steps you completed when you initially installed your main light kit.
-
-
-
As shown in the two photos for this step, continue disassembly of the rear panels.
-
As shown in the second photo, you should now be able to flip up the rear window.
-
