Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Rob K

Edit approved by Rob K


Step Lines

[title] Prepare the Pre-Lit Core
[* black] Take the pre-lit core that came with the Brickstuff kit, and carefully bend the four wires so they loop over the '''large flat '''portions of the core bottom piece.
[* icon_caution] Do not disassemble the pre-lit core bricks. They are not glued together, but disassembling or separating them will pull out the LEDs and/or the LED wires, damaging the set.
[* icon_caution] Make sure the wires are on the large flat parts of the brick bottom as shown by the red arrows. DO NOT let the wires sit in the smaller square gaps.