Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

[title] Attach the Lighting Effect Board
[* black] You should notice that the light wires are different lengths. The longest wire corresponds to the LED in the lowest position in the core, and the shortest wire corresponds to the LED in the highest position in the core.
[* black] The second photo shows the correct way to attach the LED wires. Sequence is important in order for the lighting effect to work correctly.
[* red] Attach the longest wire to the connector labeled "1" on the lighting effect board (red arrow in the photo).
[* orange] Attach the next-longest wire to the connector labeled "2" (orange arrow in the photo).
[* green] Attach the next-longest wire to the connector labeled "3" (green arrow in the photo).
[* blue] Attach the shortest wire to the connector labeled "4" (blue arrow in the photo).
[* icon_note] Note that LED wires will only fit into connectors one way-- do not force. You can press the plugs into the sockets with your fingernail, and you will feel a "click" when the plugs snap into place.

Image 1

No previous image

Added

Image 2

No previous image

Added