Changes to Step #7
Step Lines
| [title] Feed the First Wire |
| [title] Feed the First Wire |
| [* black] As shown in the first photo, pull the wire up through the space above the wheel well. |
| [* black] As shown in the second photo, on the underside of the car, remove the black "boat stud" on the right side, and hold the wire so it is '''BETWEEN '''the four studs shown by the four red circles in the photo. |
| [* icon_caution] It is critical that the wire run between the four studs, so that when the "boat stud" part is re-attached, its studs do not pinch any wires. The wire must run in the gap between the studs. |
| [* black] |
| [* black] |
Image 1
Old Version
New Version
Image 2
Old Version
New Version
Image 3
Deleted