Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

[title] Connect the Tail Lights
[* black] As shown in the first photo, the two tail light wires should extend into the rear section of the Ecto-1.
[* black] Remove the BRANCH15 adapter board from its anti-static bag, andAs shown in the second photo, connect the two tail lights1.5" black connecting cable to two of the small connecting plugslarge connector on the BRANCH03 adapter board asincluded with your kit.
[* black] As
shown in the second photo.
[* icon_note] You can
third photo, connect the two tail lights to any of the small plugsconnectors on the adapterBRANCH03 adapter board.
[* black] Remove the BRANCH15 adapter board from its anti-static bag, andAs shown in the second photo, connect the two tail lights1.5" black connecting cable to two of the small connecting plugslarge connector on the BRANCH03 adapter board asincluded with your kit.
[* black] As
shown in the second photo.
[* icon_note] You can
third photo, connect the two tail lights to any of the small plugsconnectors on the adapterBRANCH03 adapter board.
[* icon_caution] When connecting the plugs to the adapter board, note that the plugs will insert only one way-- Do not force the plugs in the wrong way. Press firmly with your fingernail to insert the plugs. You will feel a soft "click" when the plugs are in all the way.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added