Changes to Step #13
Step Lines
| [title] Connect the Tail Lights |
| [* black] As shown in the first photo, the two tail light wires should extend into the rear section of the Ecto-1. |
| [* black] Remove the BRANCH15 adapter board from its anti-static bag, and connect the two tail lights to two of the small connecting plugs on the adapter board as shown in the second photo. |
| [* icon_note] You can connect the tail lights to any of the small plugs on the adapter. |
| [* icon_caution] When connecting the plugs to the adapter board, note that the plugs will insert only one way-- Do not force the plugs in the wrong way. Press firmly with your fingernail to insert the plugs. You will feel a soft "click" when the plugs are in all the way. |
Image 1
No previous image
Added
Image 2
No previous image
Added