Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #18

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

[title] Finishing Up
[* black] Re-attach the Ecto-1 roof, and takeTake the decorative parts from your original kit roof and attach them to the Brickstuff kit roof to complete your installation.
[* black] TurnAs shown in the second photo, attach the USB power cable that came with your kit to one of the open plugs on the power, andBRANCH04 adapter underneath the car.
[* black] Connect the USB cable to power. Some or all of the lights on
your Ecto-1 shouldmay come on right away, or none may come on. The important thing is to life!
[* icon_note]
look inside under the roof and see if a red light is on. This is on the wireless receiver. If you have any trouble withsee a red light on inside the installation, or if anything does not work after connecting, send an e-mail to support@brickstuff.comcar, you know your Ecto-1 is powered up and we'll help in any way we can.
[* black] Enjoy your Ecto-1!
ready for use.
[* black] Re-attach the Ecto-1 roof, and takeTake the decorative parts from your original kit roof and attach them to the Brickstuff kit roof to complete your installation.
[* black] TurnAs shown in the second photo, attach the USB power cable that came with your kit to one of the open plugs on the power, andBRANCH04 adapter underneath the car.
[* black] Connect the USB cable to power. Some or all of the lights on
your Ecto-1 shouldmay come on right away, or none may come on. The important thing is to life!
[* icon_note]
look inside under the roof and see if a red light is on. This is on the wireless receiver. If you have any trouble withsee a red light on inside the installation, or if anything does not work after connecting, send an e-mail to support@brickstuff.comcar, you know your Ecto-1 is powered up and we'll help in any way we can.
[* black] Enjoy your Ecto-1!
ready for use.

Image 2

Old Version

New Version