Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

[title] Install the Searchlight
[* black] Remove the searchlight from the car, and replace with the pre-lit searchlight included with this kit.
[* black] As shown in the first photo, run the searchlight wires along the edge of the top of the door, '''making sure the wires run next to the studs, not on top of them.'''
[* black] As shown in the second photo, re-attach the parts you removed in Step 15. The searchlight wire should extend out from under the light bluish gray slope parts as shown in the second photo.
[* black] As shown by the red circle in the third photo, carefully insert the searchlight power wire plug into the socket labeled "Searchlight".
[* icon_caution] When connecting the searchlight, note that the plug will insert only one way-- Do not force the plug in the wrong way. Press firmly with your fingernail to insert the plugs. You will feel a soft "click" when the plugs are in all the way.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added