Changes to Step #17
Step Lines
[title] Re-Attach the Roof |
[* black] As shown by the orange square in the first photo, make sure the thick black coiled wire is pointing downward before re-attaching the roof. This is the antenna wire for the remote control. |
[* icon_note] If the antenna wire is not facing downward, gently bend it so it is aligned as shown in the second photo. '''Use care when bending so the wire does not snap off.''' |
[* black] Re-attach the roof as shown in the second photo. Make sure no wires are sticking out the sides. |
Image 1
No previous image
Added
Image 2
No previous image
Added