Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

[title] Feed The Wire (Continued)
[* black] Carefully thread the wire through the hole in the clip on the robot's bottom part in back.
[* black] Carefully pull the wire through the hole in the clip until the wire is snug against the side of the robot.
[* black] '''Remember to make sure the wire feeds between the studs, not on top of them.'''
[* black] Re-attach the side parts you removed earlier.
[* black] You may need to press the side parts with some force to complete re-attach them.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added