Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

[title] AttachRe-Attach the Battery HolderLantern
[* black] As shown in the first photo, re-attach the round black 1x1 platelantern assembly to the bottomtop of the lantern assembly. (orange arrow)black rod.
[* black] As shown in the second photo, attach a sticky square tore-attach the bottom side ofboat frame. The frame will hold the battery holderLED power wire in place.
[* black] Mount the battery holder in the base of the boat, and attachThe third photo shows what your finished boat should look like after installing the lantern assembly towith light inside.
[* black] Repeat
the topprevious steps for each of the black rod as shown in the third photo.
[* icon_note] Note that you will need to mount the battery pack slightly off-center and angled, as shown in the third photo. This is necessary to allow room to re-attach the edge piece of each boat
five boats.
[title] AttachRe-Attach the Battery HolderLantern
[* black] As shown in the first photo, re-attach the round black 1x1 platelantern assembly to the bottomtop of the lantern assembly. (orange arrow)black rod.
[* black] As shown in the second photo, attach a sticky square tore-attach the bottom side ofboat frame. The frame will hold the battery holderLED power wire in place.
[* black] Mount the battery holder in the base of the boat, and attachThe third photo shows what your finished boat should look like after installing the lantern assembly towith light inside.
[* black] Repeat
the topprevious steps for each of the black rod as shown in the third photo.
[* icon_note] Note that you will need to mount the battery pack slightly off-center and angled, as shown in the third photo. This is necessary to allow room to re-attach the edge piece of each boat
five boats.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version