Skip to main content

Changes to Step #3

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

+[title] Prepare New Headlights
+[* black] Open Bag 2 (labeled "Headlight Assembly") and carefully remove the pre-assembled headlight pair from the bag.
+[* icon_caution] The headlight assembly is very fragile. Do not pull on any wires, as doing so may damage the LEDs inside the assembly.
+[* black] As shown in the second photo, each section of the headlight assembly has large LEDs (with black circular backgrounds) but also smaller LEDs in the corners of each panel (see red arrows in photo 2).
+[* black] In order for the headlights to function correctly, it is important to mount them on the car frame with the smaller LEDs facing the ***BOTTOM ***of the assembly.
+[* icon_note] Each half of the headlight assembly has a top and bottom. The bottom of each is indicated by the small LEDs in the lower corner.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added