Skip to main content

Changes to Step #5

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

+[title] Route Headlight Wires
+[* black] After the headlights have been attached, carefully remove the brackets (on both sides of the car) as shown in the first photo.
+[* black] As shown in the second photo, carefully route the wires between the lower blue pin and the black beam (two red arrows in the second photo).
+[* black] As shown in the third photo, replace the bracket you removed in the beginning of this step.
+[* icon_caution] Make sure the wires are routed ***BETWEEN ***the pins, and that no wires are pinched by any pins.
+[* black] Repeat for the other headlight.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added