Skip to main content

Changes to Step #7

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

+[title] Route First Set of Front Wires
+[* black] As shown in the first photo (green rectangles), your headlight assembly should have two wires coming out one end of the green circuit board assembly.
+[* black] In this step, you will route the ***LEFT ***headlight wire and the ***THREE-WIRE*** cable (with red/black/white wires).
+[* black] As shown in the second photo, remove the rear-view mirror on the ***RIGHT ***side of the vehicle. This will make it easier to turn the car on its side to route the wires.
+[* black] Carefully turn the car on its side and place on a flat surface.
+[* black] As shown in the third photo, carefully pull the LEFT headlight wire and the THREE-WIRE cable down to the underframe of the car.
+[* icon_caution] Do not pull hard on any wires, or you may damage the headlight LEDs.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added