Skip to main content

Changes to Step #8

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

+[title] Continue Routing Wires
+[* black] In this step, as shown in the three photos, you will continue routing the two wires toward the back of the car.
+[* black] As shown in the second photo, bending the wires a little makes it easier to route them through the hole in the Technic bracket shown by the red circle in the third photo.
+[* icon_caution] It is important that both wires are routed as shown in the photo, including up and through the Technic hole under the driver's seat. This is necessary to keep the wires from dragging on the ground.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added