Skip to main content

Changes to Step #17

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

+[title] Connect Front and Rear Left Turn Signals
+[* black] As shown in the first photo, route the wires from the front and rear left turn signals toward the center area under the roof.
+[* black] As shown in the second photo, you can wind the front and rear turn signal wires around the Technic bracket if you have excess wire length.
+[* black] As shown in the third photo, take one of the BRANCH03 adapter boards from Bag 1 and connect both the front and rear left turn signal wires to the small connectors on the BRANCH03 board.
+[* icon_caution] The wires will only insert one way-- do not force. You can use your fingernail to press the connectors into place-- you should feel a little "click" when the plugs are fully inserted.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added