Skip to main content

Changes to Step #19

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

+[title] Mount Right Rear Turn Signal Light
+[* black] Dissemble the top half of the right rear turn signal and tail light bracket as shown in the first photo.
+[* black] Using one of the sticky squares included with your kit, mount the second red Pico LED from Bag 1 to the lower half of the red rear turn signal panel.
+[* green] Route the Pico LED cable through the small hole above the turn signal assembly as shown by the green circle in the second photo.
+[* black] As shown in the third photo, route the wire up toward the front of the car. *** As shown by the green rectangle, make sure the Pico LED cable passes behind the yellow shock absorbers.***

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added