Skip to main content

Changes to Step #20

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

+[title] Connect Front and Rear Right Turn Signals
+[* black] As shown in the first photo, continue routing the wire from the previous step through the hole in the blue Technic beam.
+[* black] As shown in the second photo, route the wires from the front and rear turn signals through the gray Technic bracket. If you have extra cable, wrap both wires around the bracket to take up the slack.
+[* black] As shown in the third photo, use another BRANCH03 adapter board from Bag 1 to connect both the front and rear right turn signal wires.
+[* icon_note] Connect both cables to the small plugs on the BRANCH03 adapter board.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added