Skip to main content

Changes to Step #33

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

+[title] Re-attach LED Mount
+[* black] Now you will re-attach the small blue Technic beam to the black mount.
+[* icon_caution] The Pico LED cable is strong enough to be inserted along with the black Technic pin, but be careful not to twist the pin while inserting. Also make sure the wires are coming out of the slot in the side of the pin before inserting.
+[* black] Carefully re-attach the small blue Technic beam to the black mount, taking care to make sure the Pico LED is aligned with the open hole in the blue mount (red arrow, second photo) and facing backward (blue arrow, second photo).
+[* black] As shown in the third photo, after re-attaching, the Pico LED cable should extend out through the center of the black Technic pin and the Pico LED should face so it is pointed out the T-shaped hole in the blue Technic beam (red csquare, third photo).

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added