Skip to main content

Changes to Step #36

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

[title] (Optional) Connect the AA Battery Pack
[* black] Your lighting kit includes a USB cable for power, but if you want to have your Bugatti lighting 100% self-contained, you can also use our 3AA battery pack (sold separately) to power the set. This step shows how to mount the battery pack if you decide to use it instead of the USB cable.
[* icon_note] You can skip this step if you do not plan to use the battery pack.
-[* black] The battery pack fits perfectly in the flat space behind the seats and under the roof. Connect the battery pack cable to the last open plug on the main control board (red square int he first photo).
+[* black] The battery pack fits perfectly in the flat space behind the seats and under the roof. Connect the battery pack cable to one of the open plugs on the TRUNK11 effect controller (green arrow in the first photo).
[* black] Carefully slide the battery pack into the open space behind the seats, making sure the switch is facing to the left (blue arrow, second photo).
[* black] Carefully gather all wires and adapter boards, and slide them into the area above the battery pack (between the battery and the roof of the car). Make sure the roof section will close on top of everything and not crush any wires or boards.
[* black] As shown in the third photo by the red arrow, the on/off switch for the battery pack should be visible through the gap between the roof panels. This makes it easy to turn the power on or off using a tweezers or pen tip even when the car is closed up.

Image 1

Old Version

New Version

Image 2

Old Version

New Version