Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Rob K

Edit approved by Rob K

Before
After
Unchanged

Step Lines

[title] Finish Connecting the Boat Lights
[* black] Behind your castle, you should have a BRANCH18 adapter with five plugs from when you installed the main light and sound kit. There should be two open plugs on the BRANCH18 adapter board.
[* black] As shown in the first photo, connect the other end of the boat lighting cable to one of the open plugs on the BRANCH18 adapter
[* icon_note] You can use any open connector on the BRANCH18 adapter.
[* black] If you haveTo test the boat lights, connect your main castle kit connected to power, youpower. You should see all five boat lanterns turn on and begin flickeringflickering as shown in the second photo.
[* icon_note] Keep your castle connected to power for the remaining installation steps
.
[* black] If you haveTo test the boat lights, connect your main castle kit connected to power, youpower. You should see all five boat lanterns turn on and begin flickeringflickering as shown in the second photo.
[* icon_note] Keep your castle connected to power for the remaining installation steps
.

Image 2

No previous image

Added